MEI dust monitoring system is the kit IoT Data Logger Use microcontroller STM32, supports dust sensor connection PM1.0, PM2.5, PM10 qua UART or RS485 Modbus RTU to monitor air quality in factories and outdoors. Connected devices 4G LTE, Wi-Fi or Ethernet (LAN), transmit data to the platform MEI ECO via protocol MQTT. Support system Continuous Mode and Low Power Mode, integrated Offline Data Logging, automatically synchronizes data when connection is restored and supported Remote firmware update (OTA). User-configurable alert,receive thresholds Push Notification, Dashboard monitoring, trend charts and Export Excel report on Web/App.
Fine particulate matter monitoring
Products
Fine particulate matter monitoring
The MEI dust monitoring system is the solution IoT Data Logger Developed on microcontroller platform STM32, specialized for monitoring dust concentration in factories, production areas, warehouses and outdoor environments in real time. The device supports connecting dust sensors PM1.0, PM2.5, PM10 through communication UART, RS485 Modbus RTU or other digital communications, meeting air quality monitoring requirements in many industrial applications.
Devices that support connection 4G LTE, Wi-Fi or Ethernet (LAN), transmit data to the platform MEI ECO through protocol MQTT, allowing remote monitoring and management on Web/App. Support system two operating modes includes Continuous Mode (continuous monitoring) and Low Power Mode (energy saving), suitable for both grid power and systems using battery or solar energy.
To ensure data is not lost, the device integrates Offline Data Logging, automatically saves data when Internet connection is lost and syncs again when connection is restored. In addition, the support system Remote firmware update (OTA - Over-The-Air Firmware Update) through the network 4G, Wi-Fi or LAN, helps upgrade features and patch bugs without direct access to the device.
Users can configure sampling cycle, data transmission cycle, alarm threshold for each dust and receive parameter Push Notification when the dust concentration exceeds the limit or the device has a problem. Platform MEI ECO Provides Dashboard, trend charts, user permissions and Export Excel report, effectively meeting the needs of air quality monitoring in factories and outdoor environments.
TECHNICAL SPECIFICATIONS
MEI dust monitoring system is the kit IoT Data Logger Developed on microcontroller platform STM32, specialized in collecting, processing and monitoring dust parameters in industrial and outdoor environments in real time. The device is designed to meet the requirements of continuous operation in harsh conditions, suitable for deployment at factories, industrial parks, environmental monitoring stations, mineral exploitation areas, construction sites and air quality monitoring points.
The device supports connection to dust sensors PM1.0, PM2.5, PM10, TSP through communication standards UART, RS485 Modbus RTU or digital interface for each sensor type. Processor STM32 Performs sampling according to configuration cycles, processes and filters signal noise, checks sensor status, calibrates data (Calibration), timestamps (Timestamp) and stores data before transmitting to the server.
The system supports Internet connection via 4G LTE, Wi-Fi or Ethernet (LAN), transmit data to the platform MEI ECO use protocol MQTT, allowing real-time monitoring on Web/App with low latency. Support equipment Continuous Mode, suitable for applications requiring 24/7 continuous monitoring, and Low Power Mode, where the STM32 uses Sleep/Stop modes to reduce energy consumption, only activating the sensor and communication module according to the installation cycle, suitable for battery or solar powered systems.
Integrated equipment Offline Data Logging Use Flash or SD memory card to store data when Internet or server connection is lost. Once the connection is restored, the data will be available automatically synchronizes according to the correct timestamp, ensuring the continuity and integrity of the database. The system also supports Firmware Over-The-Air (OTA), allowing remote control program updates via 4G, Wi-Fi or LAN, helping to upgrade features, fix errors and maintain equipment without direct operations on site.
Users can configure sampling period, data transfer period, calibration coefficient, alarm threshold High, Low, High-High, Low-Low and warning delay time for each dust parameter. When detecting dust concentration exceeding the limit, losing sensor signal or losing device connection, the system will record Alarm Log, and send at the same time Push Notification to the Web/App platform in real time.
Platform MEI ECO Supports centralized management of multiple devices, Dashboard display, trend charts, real-time data, operating history, user authorization and Export Excel report, meets the requirements for monitoring, analyzing and managing air quality in industrial and environmental applications.
Technical specifications are subject to change.
Products for the same solution
Water and wastewater quality monitoring device (internal monitoring)
Equipment for monitoring water and wastewater quality MEI GROUP research and development, supports connecting sensors via 4–20 mA, RS485/Modbus RTU and Digital Input. Data is collected, processed and transmitted Server via LAN or Wi-Fi, and save at least Offline 100 days with a cycle of 5 minutes/time. When the network is restored, the device automatically synchronizes data. Platform Web/App allows real-time monitoring, viewing graphs, history, setting alarms, exporting reports and managing mult
MEISync - CTG.100
MEISync is an industrial IoT controller that integrates 10 Relays, Ethernet LAN, real-time RTC and large capacity Winbond memory. The device allows automatic control according to schedule, multiple operating hours and remote control via Web/App. Data and activity history are saved locally and automatically synchronized when there is a network connection. Supports remote OTA, anti-crash Watchdog, backup firmware and self-recovery mechanism, helping the system operate stably 24/7 in lighting, auto
BPS CONTROLLER – CT.400
BPS Controller – Model CT.400 is an industrial controller and monitor made by MEI Group research, design, development, and use STM32F407 high performance. Integrated equipment 4G LTE, RS485/Modbus RTU, 03 AI 4–20 mA, 10 DI (0–24 VDC), 10 Relay DO, 03 AO 0–10 V and 03 AO 4–20 mA, allowing connection to sensors, inverters, power meters, HMIs and many industrial devices. CT.400 supports configuration and OTA firmware update remotely, save data when connection is lost and automatically synchronize t
Door monitoring
MEI access control and monitoring system is the solution IoT Access Control Use microcontroller STM32, connect Ethernet (LAN) to manage factory entrances and exits in real time. Support equipment RFID card reader, people counting sensors and controls Magnetic Lock, allows opening by card, Web/App or according to set time frame. The number of people remaining in the area is shown above 7-segment LED display. Integrated system emergency push button to unlock when escaping, support Offline Data Log
CNC machine monitoring
MEI CNC machine output monitoring system is a set IoT Edge Data Logger Use microcontroller STM32, collect signals from Stack Light without intervention in the PLC or CNC program. The device automatically determines the status Run, Idle, Alarm, Setup, calculate output and indicators OEE in real time. Connection support system Wi-Fi or LoRa, transmit data to the platform MEI ECO via protocol MQTT, integrated Offline Data Logging, automatically synchronizes data when connection is restored and supp
BPS Controller - CTG.300
Pump station pressure regulation equipment of MEI GROUP is a specialized controller that helps maintain stable pressure on the water supply network by adjusting the inverter frequency accordingly critical pressure point. The device collects pressure data from 4–20mA sensors at the station or from remote pressure nodes via LoRa, combines Modbus/RS485 data to calculate and control the inverter in real time. Support equipment many operating hours, each time frame has its own pressure setpoint and fr
LoraSync - LR.100
Monitoring and control equipment LoRa MEI is an industrial IoT solution for factories, pumping stations and technical infrastructure. Device uses power 220VAC, integrated 01 RS485 Modbus RTU, 04 Digital Input 0–24VDC and 10 Relay Output 220VAC to collect data, monitor status and control devices remotely. Technology LoRa Allows long-distance communication, reduces wiring costs and is easy to deploy on a large scale. Connect to the platform MEI Eco Web/App, the device supports real-time monitoring
Remote sensor monitoring
The system monitors temperature and pH through LoRa MEI is the solution IoT uses STM32, allowing data to be collected from multiple LoRa Sensor Node and transmitted LoRa Master Gateway. Gateway displays data on the screen, while connecting Ethernet (LAN) or Wi-Fi to transmit data to the platform MEI ECO via protocol MQTT. The system supports sensor connection RS485 Modbus RTU, 4–20 mA or Analog, set alarm threshold and send Push Notification when the parameter exceeds the limit. Both Sensor Node
Factory temperature and humidity monitoring
The MEI temperature and humidity monitoring system is an IoT solution that uses sensors SHT30 and controller STM32 to monitor environmental conditions in real time. Devices that support connection Wi-Fi or Ethernet (LAN), display temperature and humidity above 7-segment LED and Web/App platform. The system allows configuration of alarm thresholds, local horn activation and sending Push Notification when parameters exceed limits or the device has a problem. Data is stored offline when connection
Lora Node (Model: CT003)
MEI GROUP CT.003 is a fire alarm signal receiver using LoRa technology, allowing real-time monitoring of system status on the Web and App. The device supports instant alerts when problems occur, stores operation history and remotely monitors connection status. Compact industrial design, installed directly in electrical cabinets or fire alarm cabinets, suitable for factories, buildings, warehouses and commercial centers.
AQUAMONITOR - DTG.800
The MEI Datalogger device monitors the wastewater treatment system, collecting data from sensors via RS485 (Modbus RTU), pulse input and 4–20mA analog signals such as pH, COD, TSS, DO, flow, water level. The device is capable of controlling the sampler automatically by time or flow, and recording full event logs. Data is stored in parallel online and offline, automatically sent compensation when there is a network outage and safely backed up when there is a power outage. The system connects to th
SENSOR - DTG.100
MEI's temperature and humidity monitoring device is an industrial IoT solution connected to WiFi, transmitting data directly to the platform. MEI Eco Web App for centralized monitoring and management. The device accurately measures environmental temperature and humidity, suitable for installation in factories, cold storages, server rooms, agricultural greenhouses and technical electrical cabinets. Data is updated in real time, displayed on an intuitive dashboard with hourly, daily, and monthly ch
SMART PRV - PRV.03
The MEI pressure monitoring and regulation system is the solution IoT Use microcontroller STM32, specializes in monitoring pressure and flow in water supply networks, and automatically controls pressure regulating valves to maintain stable pressure and reduce water loss. The device supports pressure sensor connection 4–20 mA, flow meter RS485 Modbus RTU and transmit data directly to the platform MEI ECO qua 4G LTE use protocol MQTT. The system operates by Solar energy combined with rechargeable
Fire alarm monitoring
MEI GROUP's smart fire alarm equipment is a specialized IoT solution for factories, warehouses and buildings, meeting the requirements of continuous safety monitoring and centralized management. Equipment used LAN connection as main channel to ensure stable data transmission. When a LAN or system failure occurs automatically switch to 4G, maintains an uninterrupted connection with MEI's monitoring center and web app platform. The device connects directly to the Smoke detector, heat detector, fire
10-channel Wi-Fi/LoRa controller
MEI ECO 10-channel controller is a smart remote control solution using the STM32 platform, supporting LoRa or WiFi connection. The device integrates 10 independent relay/MOSFET channels to control pumps, solenoid valves, fans, lights and industrial equipment. Supports manual control, timer, automatic scenario and sensor linkage. Status data, voltage, load current, temperature and alarms are monitored in real time on the MEI ECO Web/App. The device has OTA, watchdog, anti-EMI interference and 24/
PumpPerf - DTG.500
MEI pump performance analysis system allows to evaluate the relationship between flow (Q) and pressure/water column (H) during the actual operation of the pumping station. The device collects data from flow sensors (pulse, M-Bus, Modbus) and 4–20mA/LoRa pressure sensors, then automatically “counts samples”, filters noise and creates data groups that accurately reflect the pump characteristic curve according to each operating condition. Automated construction system Q–H characteristic curve, displ
IoT Gateway (model: MEI_MT03)
The ESP32 IoT LAN device is an integrated, industrial control and data acquisition suite 08 Digital Input 24VDC, 01 RS485 Modbus RTU port, 01 control relay, 01 alarm contact (Alarm Contact) and Real-time RTC. Devices that support connection LAN Ethernet and LoRa 3–8 km, allows monitoring and collecting data from sensors, PLCs, electricity meters, flow, pressure... Data is transmitted to Cloud, SCADA or Web/App for remote monitoring, warning and control. Suitable for problems of incident warning,
BMS - CTG.050
Level 1 pumping station monitoring and control equipment of MEI GROUP is a smart controller for raw water exploitation pumping stations, well pumping stations and upstream water supply systems. The device allows simultaneous control priming pump, submersible pump, drain pump following an automated process, ensuring safe and continuous operation. The device collects data from well water level sensors, pressure sensors, flow sensors, motor temperature and electrical cabinet status. Based on this da
MEISync - CTG.200
The MEI central controller is designed for industrial monitoring and control applications, water infrastructure, pumping stations and environmental monitoring. The device uses high-performance STM32F407 microcontroller, supporting RS485 connection, Ethernet, digital input, control relay and field sensor. Integrated data storage, real-time clock, remote program update (OTA) and Watchdog anti-crash mechanism. The solution allows data collection, status monitoring and remote device control via Web/
Industrial IoT Gateway
IoT Gateway MEI GROUP is a central data collection and transmission device for the factory, supporting connectivity LAN Ethernet combined with the network LoRa UART to build a distributed monitoring system without pulling long RS485 wires. Gateway uses ESP32 dual-core 240MHz, operates stably 24/7 and integrates WiFi/LAN for SCADA, MES or internal server connection via MQTT/MQTTS, HTTP/HTTPS or WebSocket. Support equipment M-Bus/RS485 Modbus RTU to read electronic water meters, industrial sensors
Office: 585/12/18 National Highway 13, Hiep Binh Ward, Ho Chi Minh City, VietnamR&D office: 121 Street No. 339, Phuoc Long B Ward, City. HCMWorking hours: 08:00 - 17:00 (Monday to Saturday)
Support
- FAQ
- Resources
- Distributor
- Technical Support
MEIGROUP DOWNLOAD
