PRODUCTS

Industrial output counting equipment uses power 24 VDC, connection support Wi-Fi or LAN to monitor and manage data in real time via Web App. Designed equipment Sealed dust-proof cover, resistant to electromagnetic interference (EMC/EMI), suitable for operation in factory environments. Supports counting output from pulse signals or sensors, setting target output, statistics by shift, day, month and user authorization. The device integrates memory to store data when the connection is lost and auto

MEI access control and monitoring system is the solution IoT Access Control Use microcontroller STM32, connect Ethernet (LAN) to manage factory entrances and exits in real time. Support equipment RFID card reader, people counting sensors and controls Magnetic Lock, allows opening by card, Web/App or according to set time frame. The number of people remaining in the area is shown above 7-segment LED display. Integrated system emergency push button to unlock when escaping, support Offline Data Log

4G MEI ECO pressure monitoring device Use microcontroller STM32F407, support 1 or 2 pressure measurement channels with the ability to automatically identify sensors. Device that transmits data through 4G, real-time monitoring on Web App, warning based on fixed threshold or time frame. Support operating mode continuously or save energy, integrated solar charging and meets standards IP67. Data is saved locally 200 days (cycle every 15 minutes), support SD Card saves configuration and history, and

MEI pressure monitoring equipment uses the platform ESP32, designed for industrial, power supply environments 12VDC and connection WiFi in the ecosystem MEI ECO. The device can read multiple pressure sensors and monitor multiple fault contacts via signals 0-24VDC, and output at the same time relay to control horn, warning light, electric valve or PLC interlock. Data is saved when the network is lost and automatically synchronized when connected again. Support equipment OTA Remote firmware update

MEI CNC machine output monitoring system is a set IoT Edge Data Logger Use microcontroller STM32, collect signals from Stack Light without intervention in the PLC or CNC program. The device automatically determines the status Run, Idle, Alarm, Setup, calculate output and indicators OEE in real time. Connection support system Wi-Fi or LoRa, transmit data to the platform MEI ECO via protocol MQTT, integrated Offline Data Logging, automatically synchronizes data when connection is restored and supp

The 4G MEI ECO Logger is an industrial data collector that supports continuous or energy-efficient operation, suitable for a variety of IoT and SCADA monitoring systems. The device integrates 2 RS485 Modbus RTU ports, 4 4–20 mA inputs, 2 pulse reading inputs and 3 control relay outputs. The logger monitors battery voltage, temperature and humidity inside the device, using the highly accurate RTC DS3231. Data is stored on 16 MB Flash and 256 KB EEPROM when connection is lost. Supports remote conf

Pump station pressure regulation equipment of MEI GROUP is a specialized controller that helps maintain stable pressure on the water supply network by adjusting the inverter frequency accordingly critical pressure point. The device collects pressure data from 4–20mA sensors at the station or from remote pressure nodes via LoRa, combines Modbus/RS485 data to calculate and control the inverter in real time. Support equipment many operating hours, each time frame has its own pressure setpoint and fr

Monitoring and control equipment LoRa MEI is an industrial IoT solution for factories, pumping stations and technical infrastructure. Device uses power 220VAC, integrated 01 RS485 Modbus RTU, 04 Digital Input 0–24VDC and 10 Relay Output 220VAC to collect data, monitor status and control devices remotely. Technology LoRa Allows long-distance communication, reduces wiring costs and is easy to deploy on a large scale. Connect to the platform MEI Eco Web/App, the device supports real-time monitoring