PRODUCTS

ATS MEI cabinet monitoring system is a kit IoT Data Logger Use microcontroller STM32 and connection 4G LTE to monitor temperature, humidity and cabinet door opening/closing status in real time. Support equipment Continuous Mode and Low Power Mode, instantly detects when the cabinet door is open using a magnetic sensor, and monitors temperature, humidity and sends Push Notification when parameters exceed thresholds or problems arise. Integrated system Offline Data Logging, automatically synchroni

MEI smart lighting cabinet system is an IoT solution that helps centrally monitor and control the lighting system via Web and Mobile platforms. The system allows turning on/off, adjusting the brightness of each light or each line via the LoRa network, setting up automatic operating scenarios over time, and monitoring voltage, current, power and energy consumption. Incidents such as overload, lost connection or faulty equipment are alerted immediately. In addition, the system supports displaying

MEI GROUP's smart fire alarm equipment is a specialized IoT solution for factories, warehouses and buildings, meeting the requirements of continuous safety monitoring and centralized management. Equipment used LAN connection as main channel to ensure stable data transmission. When a LAN or system failure occurs automatically switch to 4G, maintains an uninterrupted connection with MEI's monitoring center and web app platform. The device connects directly to the Smoke detector, heat detector, fire

MEI ECO 10-channel controller is a smart remote control solution using the STM32 platform, supporting LoRa or WiFi connection. The device integrates 10 independent relay/MOSFET channels to control pumps, solenoid valves, fans, lights and industrial equipment. Supports manual control, timer, automatic scenario and sensor linkage. Status data, voltage, load current, temperature and alarms are monitored in real time on the MEI ECO Web/App. The device has OTA, watchdog, anti-EMI interference and 24/

MEI pump performance analysis system allows to evaluate the relationship between flow (Q) and pressure/water column (H) during the actual operation of the pumping station. The device collects data from flow sensors (pulse, M-Bus, Modbus) and 4–20mA/LoRa pressure sensors, then automatically “counts samples”, filters noise and creates data groups that accurately reflect the pump characteristic curve according to each operating condition. Automated construction system Q–H characteristic curve, displ

MEI smart weather monitoring system is the solution IoT uses STM32, connect 4G LTE and solar energy to monitor environmental parameters in real time. The device supports sensor connection RS485 Modbus RTU or 4–20 mA such as wind speed, wind direction, rainfall, light intensity, temperature and humidity. Data is transmitted to the platform MEI ECO via protocol MQTT, store offline when connection is lost and automatically sync when network is available. The system supports configuring alert and se

The ESP32 IoT LAN device is an integrated, industrial control and data acquisition suite 08 Digital Input 24VDC, 01 RS485 Modbus RTU port, 01 control relay, 01 alarm contact (Alarm Contact) and Real-time RTC. Devices that support connection LAN Ethernet and LoRa 3–8 km, allows monitoring and collecting data from sensors, PLCs, electricity meters, flow, pressure... Data is transmitted to Cloud, SCADA or Web/App for remote monitoring, warning and control. Suitable for problems of incident warning,

MEI Group's factory output monitoring system uses LoRa IoT technology to collect, transmit and display real-time production data. The terminal devices record output, machine status and send data to the central Gateway via long-range LoRa connection. Data is displayed directly on the industrial LED panel, and synchronized to the MEI ECO Cloud, Web and App platforms. The system supports incident warnings, data storage in case of network outage and analysis of production performance, helping to imp